Teral Coolant Pump VKP075A / VKP075A-4Z is a non-self priming immersion flow type of pump used to recirculate a coolant, generally a liquid that is used to transfer heat away from an engine or other device that generates heat as a by product of producing energy. The pump need to be immersed in the tank with the suitable length of leg when it is used. It can be easily installed in confined area and enhance protection against mist and other environmental elements with a standard efficiency (IE1) motor. Structured with a non-seal (mechanical seal-less) allows coolant to flow from a narrow gap without using a seal in the gap between motor section with the cast iron is used in the pump’s main unit. Teral Coolant Pump VKP075A / VKP075A-4Z mainly used with grinding liquid, cutting liquid and it is not easily disturbed by chips with the liquid that is less than 40°C with no frozen liquid with a suitable viscosity of the liquid. This coolant pump is designed to use for cutting oil, do not use water and special fluid such as printing fluid, acid fluid and etc.
A immersion, single stage and non-self priming type with special resin or CAC407 impeller, SPCC terminal box, SPHC end cover, SPCC oil thrower and FC150 discharge material.
Structured with a non-seal (mechanical seal-less) by depressurizing the coolant and the cast iron is used in the pump’s main unit.
Not easily disturbed by chips that works well with dirty coolant due to mechanical less-seal and no coolant leakage or other problem.
Support with the RoHS Directive environmental load 6 substances and European standards.
EU Directives(CE marking) and IEC standard compatible terminal box.
Upgraded with environmental resistance(mist,etc.) and the international protection class is IP54 that suppress the rise in coolant temperature and prevents air accumulation.
Oil sealing is provides on the motor section and wide strainer increases suction area.
Inverter enables energy-saving operation by regulating the flow rate.
Suitable for most type of tanks and mainly used with grinding liquid, cutting liquid and it is not easily disturbed by chips.
Capable of serial running that can generate up to 3.92MPa and works well with small quantity of liquid or shut of operation.
